Due To (Covid-19) Outbreak, We Strive To Deliver Your Product Timely!

Sailfly-X 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone PNP BNF w/ 25mW VTX 700TVL Camera

Happymodel Sailfly-X 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone PNP BNF w/ 25mW VTX 700TVL Camera

Sailfly-X 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone PNP BNF w/ 25mW VTX 700TVL Camera










Specification:
  • Brand Name: Happymodel
  • Model: Sailfly-X
  • Item Name: 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone
Version:
PNP ( Without Receiver) / Compatible Frsky RX /
Compatible Flysky RX / Compatible DSM2/DSMX RX (Optional)
  • Frsky version support both NON-EU and EU-LBT Frsky transmitter
  • (EU-LBT need to update the firmware to Betaflight 4.0 ( release date: 2019-4-11)
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
  • No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS, etc.
  • Wheelbase: 105mm
  • Size: 95mm*95mm*50mm (without propellers)
  • Weight: 35g (without battery)
  • Weight:60g (with Original 3s 300mah Lipo battery )
Crazybee F4 PRO Flight Controller
(Frsky version) CRAZYBEE F4FR PRO V2.1 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V2.1 Firmware target: CrazybeeF4FS
(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.1 Firmware target: CrazybeeF4DX
(No RX version) CRAZYBEE F4 PRO V2.1 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-3S battery input (DC 7.4-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
 
EX1102 8500KV Motor

Mode: EX1102 8500KV
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S
 
Onboard 5A 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 2-3S LiPo/LiPo HV (7.4v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
 
Onboard Frsky Receiver Version

SPI BUS receiver
Frsky D8/D16 switchable
Compatible both Non-EU and EU-LBT transmitter Channels: 8ch or 16ch
EU-LBT support(need to update beta flight v4.0 date 2019-04-11)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard Flysky receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
 
Onboard DSM2/DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
PNP Version ( Without Receiver)
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS, etc
 
40CH 25mW VTX AIO 700TVL Camera 
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) 
Size: 13.9"12.0mm ( L*W )
Weight: 3.2g
 
Lipo Battery ( All Version have)
Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 25g
Connector: XT30
 
Features:
  • Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible
  • The lightest 1102 brushless motor only 2.7g with double ball bearings 
  • Light, Powerful and smoothly 
  • AIO 5.8G 40CH 25mW VTX / 700tvl camera with smart audio
  • 2mm carbon fiber frame with TPU 3d-printed canopy 
  • Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles(DSMX version no RSSI output)
  • Full telemetry function ready (Frsky and Flysky version support)
  • Compatible both for 2s-3s Lipo/LIHV
Package Included:
  • 1x Sailfly-X FPV Racing Drone 
  • 1x 3D Printed 30 Degree Angle Canopy ( Red)
  • 1x 3D Printed 40 Degree Angle Canopy ( Purple)
  • 1x 3S 11.4v 300mah 30C/60C battery
  • 1x Propeller disassemble tool 
  • 1x Screwdriver
Secure Payment
Worldwide Shipping
24/7 Customer Care
30 Day Money Back